The easy-to-install and compact automation set is designed for swing gates up to 1.8 m (one leaf) wide and weighing up to 100 kg. Supply voltage 24 VDC.
Technical characteristics:
• easily programmable;
• automatic setting of limit positions during opening and closing;
• automatic fault diagnosis;
• slowing down when opening and closing;
• obstacle detection using dual technology;
• operation in the event of a power failure is optional
• rechargeable battery (PS324).
OLTRE! Retractable motor for swing gates up to 100 kg and leaf length up to 1.8 m
24 Vdc irreversible electromechanical gearmotor.
Minimum Visual impact
Small size. The motor can be installed in profiles of the gate leaf or in columns that are also very thin (minimum diameter 55 mm).
With the installation from below the fixing of the motor in the column is facilitated.
Die-cast aluminum structure, IP67: Besides it withstands the most severe weather conditions.
Fast and reliable
Complete opening of the leaf (90 °) in about 10 seconds. Engine tested for use of 60 cycles / hour, therefore suitable for intensive use.
External manual release easy to use: manual opening always possible without removing the gate.
Manufacturer | Nice |
IP standard | IP67 |
Torque | 150Nm |
Maximum gate weight | 100kg |
Power | 25W |
Gate width | 1,8m |
Cycles per hour | 60 |
Power | 24V DC |
You will get an e-mail with parcel ID, once the goods are sent out
up to 5 kg | 3,99 € | up to 10 kg | 5,00 € |
up to 30 kg | 9,00 € | up to 75 kg | 15,00 € |
up to 200 kg | 70,00 € | up to 1000 kg | 200,00 € |
The easy-to-install and compact automation set is designed for swing gates up to 1.8 m (one leaf) wide and weighing up to 100 kg. Supply voltage 24 VDC.
Technical characteristics:
• easily programmable;
• automatic setting of limit positions during opening and closing;
• automatic fault diagnosis;
• slowing down when opening and closing;
• obstacle detection using dual technology;
• operation in the event of a power failure is optional
• rechargeable battery (PS324).
OLTRE! Retractable motor for swing gates up to 100 kg and leaf length up to 1.8 m
24 Vdc irreversible electromechanical gearmotor.
Minimum Visual impact
Small size. The motor can be installed in profiles of the gate leaf or in columns that are also very thin (minimum diameter 55 mm).
With the installation from below the fixing of the motor in the column is facilitated.
Die-cast aluminum structure, IP67: Besides it withstands the most severe weather conditions.
Fast and reliable
Complete opening of the leaf (90 °) in about 10 seconds. Engine tested for use of 60 cycles / hour, therefore suitable for intensive use.
External manual release easy to use: manual opening always possible without removing the gate.
Manufacturer | Nice |
IP standard | IP67 |
Torque | 150Nm |
Maximum gate weight | 100kg |
Power | 25W |
Gate width | 1,8m |
Cycles per hour | 60 |
Power | 24V DC |
You will get an e-mail with parcel ID, once the goods are sent out
up to 5 kg | 3,99 € | up to 10 kg | 5,00 € |
up to 30 kg | 9,00 € | up to 75 kg | 15,00 € |
up to 200 kg | 70,00 € | up to 1000 kg | 200,00 € |