MotionCam Outdoor (PhOD) Wireless Motion Detector with Photo Verification, 15m, 90°, PET, White,Ajax

The pattern of the Fresnel lens sections is designed so that the diagrams of the infrared radiation of a human, an animal, and thermal noise have significant differences. Large sections of the lens capture radiation at the level of the head and torso of an adult. Smaller sections make the diagram more detailed. The MotionCam lens provides the detector with accurate information about the thermal object in the detection zone and the nature of its movement.

Installing the MotionCam in the right spot, at the optimum height, and perpendicular to the likely intrusion path ensures an informative thermal diagram. It significantly improves detection accuracy. Professional installation also makes the pet immunity feature more effective.

The detector instantly analyzes the thermal diagram from the sensor: the infrared radiation intensity, the heat spot size, the motion speed, the time spent in the detection zone, and other parameters.

Ajax engineers have analyzed thousands of IR sensor triggerings caused by humans, animals, and thermal interference and developed SmartDetect. The software algorithm finds false alarm markers instantly and with high accuracy. As a result, the detector accurately responds to a human and does not bother the user with false alarms.

Temperature compensation is a software mechanism keeping the thermal diagram contrast even if the ambient temperature is close to the temperature of the human body.

With each ambient temperature measurement, the detector corrects the PIR sensor data according to the coefficient table stored in its memory. The detector is effective over the entire operating temperature range.

With the sensitivity setting, the detector adapts to the conditions of a particular room, considering possible thermal interference or pets. Changing the sensitivity setting affects the markers by which false alarms are filtered.

With low sensitivity, the detector is less likely to respond even to an active pet. And with high sensitivity, it will raise the alarm in case of any motion in the detection zone.

Sensitivity is configured in the Ajax app both on-site and remotely.

• Maximum effective radiated power (ERP) Up to 20 mW
• GFSK radio signal modulation
• Communication range: up to 1700 m Between the detector and the hub or signal repeater in the open field. Calculate the communication range of the radio signal in the system
• Encrypted communication All saved and transmitted data are protected by block encryption with dynamic key
• Radio frequency hopping: Radio communication uses frequency hopping to prevent eavesdropping and interference
• Sensor type 1 × PIR sensor
• Motion detection distance: up to 12 m When installed at a height of 2.4 m.
• Motion detection angle: horizontal: 88.5° - vertical: 80°
• Motion detection speed: 0.3 to 2.0 m/s The detector lens must be positioned perpendicular to the path you take when entering the room
• Sensitivity: 3 levels Can be set by a PRO or a user with administrator rights in the Ajax app
• Pet immunity: weight: up to 20 kg - height: up to 50 cm
• Temperature compensation Effective motion detection with temperatures between ?10°C to +40°C
• Photo by alarm: A built-in camera is activated if the detector is engaged and detects motion
• Photo on demand: The user takes a photo at any time or when the detector is engaged (depends on settings). The function is disabled by default settings
• Photo by scenario: The detector camera takes photos automatically when Ajax fire detectors are engaged. The function is disabled by default settings
• Photo resolution: 640 × 480 px - 320 × 240 px (default) - 160 × 120 px Can be set by a PRO or a user with administrator rights in the Ajax app
• IR illumination: For night or low-light shots
• Bulk images: 1 to 5 images with a resolution of 320 × 240 px or 160 × 120 px - 1 to 3 images with a resolution of 640 × 480 px. Can be set by a PRO or a user with administrator rights in the Ajax app
• Anti-tamper alarm: Warning if an attempt is made to detach the detector from the surface or remove it from the mounting panel
• Anti-counterfeiting protection device authentication
• Communication loss of connection: in 36 s Detection time depends on Jeweller settings
• Power supply: 2 × CR123A batteries, 3 V Up to 4 years of battery life
• Dimensions: 135 × 70 × 60 mm
• Weight 167 g
• Operating temperatures: 10°C to +40°C
• Maximum allowable humidity up to 75%
• Protection class IP50
• Color White.